Not Dead in a Ditch - Take Two - Part II - Curtains, Upholstery and Plumbing

While Juno is at the mechanics, mom and I are tackling the curtains and upholstery.  She'd finished one side of the dinette prior:

She used the old cushions as a template, and we salvaged the vinyl backings and the zippers.  That's five inches of high density foam.  Not cheap, but they cut, wrapped and glued the batting on for us.  It sits well now, but I'm worried it's going to be too stiff for sleeping.  FYI - that shadow between the cab seats is just that - a shadow, not a stain!  And the material is actually more of lime than the light in this picture shows.  So both sides are done now.

The same material will cover the valance above the dinette and this is the curtain material I've chosen for the dinette window:

Those are also finished except for the hemming.  I used stitch witchery fabric adhesive to make those since the sewing machine was occupied :-)  Going for a tiki/atomic lounge theme - but I can never stick to themes so will just be eclectic, I suppose, when finished!

The curtains for the loft are currently underway.  On those I went for plain teals - three different shades of blue/green - sort of ombre I guess?  I want it to feel beachy when up there.  The trim with the plastic clips that go on the rails isn't in great shape, but decided to keep those - and here's the old sewing machine I'm working on (which works just fine).  I'm not fond of this task, however - especially the gathering for the pintucking -  so glad my mom is helping!  

Per my last discussion - I replaced the two outlets and fully inspected my electrical system.  The 12v receptacle didn't work, but it's possible a toggle above the bunk controls that.  If not, I'll replace it when I start wiring in my gadgets.

On to plumbing - I managed to get the city water inlet changed out, a diverter added to the city water line, my housing box built for where the pump was moved to, the leaking water valve module off the toilet (without removing the toilet!) and after a couple of tries the right part in to replace it with.  I'm a little aggravated with Thetford's customer service girl who was short with me (I have to go to lunch  - and then closed our chat window without so much as a by your leave) and told me the wrong part, however, that said I told her I had an Aqua Magic IV (that's the brochure I had in the owner's papers) and I actually have a V.  The video below was a great find - shows me exactly what was wrong (the PO didn't winterize so this is the type of leak I had) and what I needed to do step by step (and was actually the same part) so I recommend it:

FYI - I did try fixing it with epoxies that were recommended with no luck.  It's a twenty dollar part off Amazon and as I said, I was able to remove it without pulling the toilet (I'm going to wait til I redo the flooring to do that ).

And, finally here's the housing I built for the water pump:

I thought a lot about this - I know this cuts off seating, but normally there will only be one or two people camping and if a third, we can pull the chair up to the end of the table.  If we do end up with two people one one side of the dinette, the person on the inside can put a leg up and extend it, as a second board, the same width, will ride above this on the bed rails, and I'll put a cushion on top of that so with the table off it will function as a u-shaped dinette, or that end as a chaise even for tv watching.

The box top will be a shelf for a few of the electronics (like weboost and solar controller mounted on velcro).  The wiring for that will run into the dinette box to the left without ever going into the housing - there is already a 12v there.  Can access it easily enough then to see when I need, but not cluttering up the little wall space I have.

The top and the front of this box is velcroed on so I can access it easily and quickly (both diverters are in there as well).  Now the left hand dinette will be totally electrical (converter, battery bank and much of the wiring harness) except for one water line which has two elbows and I'll be further protecting with some sort of sleeve. 

The velcroed panels also will allow me to adjust when I replace the carpet with those vinyl wood-look planks.  The carpet is not in bad shape at all - looks new, padding underneath nice - but the color, eh, I am leaving some of the brown for now (table and kitchen counter), but this is just the wrong vibe for what I'm going for.  Actually it would have been perfect for that sort of rustic classic camper with pine greens and plaid...but, I didn't go that way!

That's it for updates - appreciate those following along, and especially appreciate those helping me with advice on the discussions.  Seriously, reno'ing this rig is turning into a group effort!  I would not be so far along (and probably many more mistakes) without you all.

I promise when I'm done you'll get a full video tour!

Views: 49

Comment

You need to be a member of Good Old RVs to add comments!

Join Good Old RVs

Comment by Tina on June 21, 2017 at 5:39pm

Awesome update! You are doing great. :)
That sewing machine is one of my favorites, I love to sew.
And kudos to you for keeping the original zippers etc. Those aren't chea and getting the right size can be a pain.
I love the pump box idea too.

Comment by Rich Thomas on June 19, 2017 at 1:12pm

Nice job Dawn

Comment by M K Wilkie on June 18, 2017 at 9:54pm
Great progress. I love the lime cushions. They look great. Your machine looks just like a woman's machine on another site I'm on. They're good. Not modern junk. Your writing is top notch. Very organized and easy to follow!
Comment by Lakota Wolf on June 18, 2017 at 12:42pm

AWESOME progress.. A little imagination and persperation and it looks as if you have it all coming together rather nicely. That pump box under the dinette looks great, and the idea with velco is a great idea, easy access... Looking good..

Members

COME JOIN US on GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Wintering in an RV 4 Replies

Started by Edwin Douglas in General Discussion Forum. Last reply by Ralph Javins yesterday.

Wintering in an RV

Started by Edwin Douglas in General Discussion Forum yesterday.

Blog Posts

Things that need to get did.

Posted by Lakota Wolf on September 19, 2017 at 2:11pm — 1 Comment

Ark Encounter, the Great Eclipse, Falls and More Part 6

Posted by carey masci on September 15, 2017 at 1:40pm

A very contructive day.

Posted by Lakota Wolf on September 14, 2017 at 5:41pm — 2 Comments

Carbs..and Paint...and Gas...Oh My!

Posted by Tina on September 10, 2017 at 6:56pm — 3 Comments

When its time to Bug out in an emergency

Posted by Lakota Wolf on September 8, 2017 at 5:14pm — 4 Comments

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.         JOIN HERE NOW!

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Campers Vintage Travel Trailers Vintage Camper Restoration Retro Campers Bus Conversions Vintage RV Forums Frugal RV living Old RVs

YOUR OWN GORVs T-Shirt!

A work of art by member Paige Bridges

Get your Good Old RVs T-Shirt HERE

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases. You could get computer viruses or hacks. Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2017   Created by Pat Daly.   Powered by

Badges  |  Report an Issue  |  Terms of Service