Comments - Weight distibution hitches (round bar) - Good Old RVs2024-03-28T23:01:48Zhttps://goodoldrvs.ning.com/profiles/comment/feed?attachedTo=2093474%3ABlogPost%3A240551&xn_auth=noThanks guys...the calculated…tag:goodoldrvs.ning.com,2015-05-30:2093474:Comment:2579572015-05-30T03:56:36.291Zdavid crafthttps://goodoldrvs.ning.com/profile/davidcraft
Thanks guys...the calculated ball heigth I developed on my own though others may have done it. I have not seen it mentioned anywhere else. I just never had a big flat piece of slab everytime when needed. As far as setting the ball mount, thats old school eaz-lift from the 70's. Now that we got F150s pulling 35 foot trailers, I'd like to take a crack at the weight ratings scene. These simple instructions will work for most folk who are not maxing out their rig, but I want to make it…
Thanks guys...the calculated ball heigth I developed on my own though others may have done it. I have not seen it mentioned anywhere else. I just never had a big flat piece of slab everytime when needed. As far as setting the ball mount, thats old school eaz-lift from the 70's. Now that we got F150s pulling 35 foot trailers, I'd like to take a crack at the weight ratings scene. These simple instructions will work for most folk who are not maxing out their rig, but I want to make it complete...or at least better. Thanks for your support...together we all make a difference. Your right onthe anti-sway Pat...It has a place here too for sure... Very informative litature Dav…tag:goodoldrvs.ning.com,2015-05-29:2093474:Comment:2579502015-05-29T23:52:00.856ZLakota Wolfhttps://goodoldrvs.ning.com/profile/LakotaWolf
Very informative litature David. You have definitely passed on some very wise info on the subject. I liked how you blended in the safety factors,I.e. relieving the load before removal. I've seen numerous accidents and injuries when people try to release the bars under a load. Very good Tip article. Thanks for sharing.
Very informative litature David. You have definitely passed on some very wise info on the subject. I liked how you blended in the safety factors,I.e. relieving the load before removal. I've seen numerous accidents and injuries when people try to release the bars under a load. Very good Tip article. Thanks for sharing. Hi David, you can edit your p…tag:goodoldrvs.ning.com,2015-05-29:2093474:Comment:2577712015-05-29T23:30:55.770ZJimco_W001https://goodoldrvs.ning.com/profile/JimKrohmer
<p>Hi David, you can edit your post by clicking on the options button.Its located in the center of the page just below the header photo.Please let me know if you have any problems</p>
<p>Hi David, you can edit your post by clicking on the options button.Its located in the center of the page just below the header photo.Please let me know if you have any problems</p> Id like to edit this a little…tag:goodoldrvs.ning.com,2015-05-29:2093474:Comment:2579492015-05-29T23:13:17.022Zdavid crafthttps://goodoldrvs.ning.com/profile/davidcraft
<p>Id like to edit this a little but not sure how. I know a few folks are pushing the envelope a little maxed out rigs where this may be too simplified for them. weighing the vehicles and trailers to be sure that GCWR and GVWR ratings are within limits but the other tutorials give you no place to start with ball height and platform pitch etcetera. Let me say this: start with this set up, measure front fender height before hookup and after with WD hitch, adjust spring bar tension to get near…</p>
<p>Id like to edit this a little but not sure how. I know a few folks are pushing the envelope a little maxed out rigs where this may be too simplified for them. weighing the vehicles and trailers to be sure that GCWR and GVWR ratings are within limits but the other tutorials give you no place to start with ball height and platform pitch etcetera. Let me say this: start with this set up, measure front fender height before hookup and after with WD hitch, adjust spring bar tension to get near the same height, then go to the scales. You may save yourself a lot of trips...</p> The search function still pul…tag:goodoldrvs.ning.com,2014-11-26:2093474:Comment:2405912014-11-26T00:17:37.382Zdavid crafthttps://goodoldrvs.ning.com/profile/davidcraft
The search function still pulls up threads fairly well. I'm good with that. There were some hanging threads I thought could be addressed since these topics transend time and are good for eternity almost..lol...i thought i would add info to them. LMK if thats not proper, so I can adjust my MO.
The search function still pulls up threads fairly well. I'm good with that. There were some hanging threads I thought could be addressed since these topics transend time and are good for eternity almost..lol...i thought i would add info to them. LMK if thats not proper, so I can adjust my MO.