Best Roof Sealer!!

[Robert Wesner]

For anyone that hasn't heard of it, GacoRoof is - by far - the best roof sealer.

 

Developed in Seattle, it's 100% silicon!

 

This comes highly recommended by many RV'ers.

 

I used it on the roof seams of my 33 yr old Winnebago and it works great!

 

Be warned - it's NOT cheap - can run between $60-80 for a gallon can but worth every penny.....

 

http://www.gacoretail.com/gacoroof.html

 

 

 

well, that's my two bits..........

 

~Robert the Hair

[Steve]

Robert:

We have had this question come up a lot lately (what is the best roof sealer for RV's) and I have to say I agree!  We have sold quite a bit of Gaco Roof for RVs and it is a fantastic product.  A gallon of GacoRoof will cover 100 square feet, and it's best to do 2 coats, so figure one gallon for every 50 square feet of surface you want to cover.

The coating is very reflective, so it has the added benefit of keeping interiors cooler while keeping them dry.

-Steve

Tags: roof sealer, gacoroof, leak, roof leak

[Robert Wesner]

YUP!

I carry a gallon everywhere we go, now.  We go coast to coast and I don't want to be caught without it - just in case we spring a leak!

I used the disposable sponge brushes and just dab it on and let it flow.  Stuff is awesome!

Sealed all the leaks on the roofline of our '78 heavily-abused Winnebago....

[Steve]

Robert:

Great idea on the sponge brushes!  Do you have any special tricks to prepping the surface, or do you just slap on more GacoRoof?

[Robert Wesner]

we have an aluminum sheet roof so I just used a healthy does of Windex to take off the dust/grime - then just slathered it on.

BE CAREFUL ON HOT DAYS!

it comes out of the can like cold honey but as it warms up it gets thinner and thinner

did a roof edge - 20 minutes later it started dripping down the wall!!

best to use it under about 80 degrees for better control of the coat.

....just sayin'

[08vgdzzc41laa]

Hi,

Is this just for the flat surfaces or can it be used for joints and seam openings like where the skylights come through the roof?

I just purchased a 1989 Winnebago that has a uncoated aluminum roof and I want to protect the aluminum and seal the joint between the flat aluminum and the fiberglass crown between the roof and the walls.

Peter

[kate]

eternabond and gacoroof.... those two words are the holygrail for a newbie like myself. thank you for the tip! I will give them a shot! also... sincerest thanks for the link to buy :)

[redwing]

https://www.youtube.com/watch?v=fKNgsZ4LHyM&list=UU_MBX6aK5ZU2I...

 

watch this video, i don't trust silicone because it will not stick to alot of things, and if you ever have to cover it your stuck.    redwing

 

[0l9c7nlsuup1p]

Here is a good source for roof coating also....  The elastomeric stuff is what you're looking for... fill/seal  cracks then paint this stuff on.

http://www.epdmcoatings.com/rv_roof_repair.html

I'm used to dealing with sailboats - keeping water out - and keeping things sealed against lots of exposure to the elements...

I agree silicone will fail in most circumstances on exterior applications- that said - although marine products usually aren't budget friendly - 3m 4200 sealant for something you'd like to get off again someday - or 3M 5200 sealant if you want it sealed permanently and whatever you may be attaching will also be almost permanent.  You can also fill cracks and voids with epoxy resins and filler mixed in.

In a lot ways, still cheaper in the long run...

Just a thought, (have swapped Gulf cruiser for land cruiser)

-Stu

 

 

 

 

[Tim Constas]

Hello,

I have to recoat my EPDM this season using GacoRoof, I called Gaco and the Representive said I probably would not have to prime the roof Gaco roof primer, would anyone who has GacoRoof let me know if primed or did not pime.

 

Thank You

[Robert Wesner]

I have never had to use primer - the GacoRoof bonds to just about anything.

[Steve]

Tim:

We sell a lot of GacoRoof to RV'ers and as Robert mentioned usually it doesn't require priming.  But the manufacturer does say that some aged EPDM requires the use of their primer.  If in doubt you can get a GacoRoof Adhesion Test Kit and test it out yourself.  The test kit is free; you just pay the cost of FedEx shipping.

Basically you paint a stripe of the coating, stick the strip of tape into it while it's still wet, let it dry, then pull up the tape.  If the coating under the tape sticks to the roof, you have good adhesion.  If all the coating pulls up with the tape, you might need the primer.

[Tim Constas]

Thanks to Robert Wesner and Steve for the information, I am going to order a test kit.  Steve you mentioned you sell a lot of GacoRoof do have site to order from?

 

Thanks again

Tim