I have rebuilt my 360 engine in our 1980 Brave.  I purchased new heads, mainly because the left one was actually split in half, but we are using the original intake.  Any advice on a new carb?  Not sure what to do at this point.  The original had the secondaries frozen up and we couldn't get it apart for a rebuild.  I took it to a carb guy, but he said there was no hope for it.

Views: 204

Reply to This

Replies to This Discussion

Thanks!
Ashely. Most mechanics now a days don't want to mess with an old carb. They want to slap a new one on. Less labor involved. Don' t fret. If the secondaries are frozen shut it may not be lost. Get yourself some good carb cleaner. Not the spray kind. Soak the entire carb in a bucket in the solvent for a couple of days or a week. Work the linkages ever now again while it is soaking - don't force it. John T & John N have given some great advise for our 360 - double barrel carb. There is a great discussion that I started called Attention Mopar heads. It may help shed some light. If you can take some photo's of your carb and post it may help other members see what is really going on with it. Regards P

That's sort of what I got out of this adventure.  The start of this was a camping trip that my rv barely pulled itself over an arched bridge.  The only weight was itself and our 5x8 trailer with the golfcart on it.  Anymore, I think no one really knows how to work on the older stuff, so they do swap it out.  In my case, the guy that "thought" he could fix it, actually ruined it and still attempted to charge me $50.00 for his time.  I know nothing about engines, so I watched a million Youtube videos and ended up tearing the engine all the way down.  The right head had 5 burnt valves and a crack between 2&3.  The left one had 8 burnt valves and was actually cracked in half.  I ordered new ones and just hung the new ones yesterday but haven't torqued them down yet.  We decided since we spent all the money to do this much, we would also purchase a new carb.

Be sure to crank the engine or electric fuel pump and flush out the fuel system into a container before installing a fresh carb.

Agreed!! That's the next step for our project. Is to drain and inspect or gas tanks first. Then fill them with fresh gas. With these old gals you don't want to contaminate what you have just rebuilt. There could be water and or rust in the lines. This could be what is causing some of the issues with your carb. Regards P

Ok.  Thanks

Nothing wrong with an original Thermoquad.  It certainly will be the easiest to install.  The OEM four-barrels with small primaries and large secondaries are pretty much limited to Carter Thermoquads or Rochester Quadrajets. Aftermarket you've got Holley Spreadbores.  The Thermoquad was a well engineered carb and gave good efficiency in the primary "two barrel" mode.  When the huge secondaries opened - it's like flushing a toliet powered by gasoline. But hey - any 600-800 CFM 4 barrel is going to do that. Only other choice it to intall a two-barrel with an adapter.  Many two barrels are less efficient that the two-barrel section of four-barrel OEM carbs.  So, not much to be gained with a two-barrel except simplicity.  In regard to aftermarket carbs. I've had many Holley double-pumpers and Spreadbores in the past and it seems I was always tinkering with them.  If it was mine, I'd stick with something OEM and engineered specifically for your engine.

I would just go to "Summitracing.com" and order a "new" Thermoquad for about $300.  The old Thermoquads were excellent carbs... especially for motor home applications.

Summit Racing part # SUM-210234 is $279.97

Thanks, jonas

Rock Auto has rebuilt Thermoquads for 360s for $252.   Why couldn't your carb-guy take your's apart?  Can't say I ever heard such a story beflore unless your carb sat outside in the rain and snow.

AUTOLINE Part # C6198 {#C4TQ} Carter 4 Barrel; Reman
C4-TQ; Carter Equipped; HD

http://www.rockauto.com/catalog/x,carcode,1075463,parttype,5904

Honestly, I think he either didn't know what he was doing or he was trying to rip me off.  I live in Myrtle Beach, so I think most of the places around here are used to charging for new parts and because people are stuck here on vacation and have no choice.  I have learned that anything done to our rv has to be done me in order not to be ripped off anymore.  Thanks for the Part number.

RSS

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Update for my fuel injection

Started by Jack Wasmuth in RV Repair & Maintence Jul 18.

Systems monitor

Started by Laura in RV Repair & Maintence Jul 14.

78 Dodge 440-3 Timing solutions needed 1 Reply

Started by Tony Levero in RV Repair & Maintence. Last reply by Jimco_W001 Jun 27.

Blog Posts

Quandary about tire pressure

Posted by CH Smith on May 19, 2021 at 5:43am — 1 Comment

Third time is a charm!

Posted by S.Heins on March 31, 2021 at 1:14pm

Newbie Fireball

Posted by Kenneth C on March 9, 2021 at 10:25pm

Lamalight

Posted by Linda Lee Toepfer on January 18, 2021 at 1:40pm

1982 Chevrolet Travel Mate Class A

Posted by Barb Stanley on December 17, 2020 at 9:15am — 1 Comment

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2021   Created by Russell E Johnson.   Powered by

Badges  |  Report an Issue  |  Terms of Service