Hi there, 

I was hoping someone could help me out, with the fridge I have in my 1977 dodge sportsman based c-class. 

It has a Dometic RM36 fridge in it, and the good news is it runs great on propane, and I've got it working pretty well off of the 110 as well, but there is a fuse missing from the 12volt circuit, and I cannot for the life of me figure out what kind of fuse it is, or even the amperage it is supposed to be. 

I feel like it might be some kind of weird old fuse that isn't common anymore, if so I might change the fuse holder out, but I still need to figure out the amperage it is supposed to be.

Cheers,

Richard

Tags: electrical, fridge, fuse, fuses

Views: 1483

Reply to This

Replies to This Discussion

Richard,please check out the RV Manuals page.The RM fridge is listed there.If you need any more help please let me know.

The manual just said to fuse with an appropriate fuse, but it said that the maximum draw for that model is 10amps. I think I will just try rewiring the fridge with a new fuse holder and a 10amp fuse and see if that works. 

Thanks for the quick reply, I appreciate it!

Richard,the normal DC fuse rule is use a fuse that is 2x's the amount of current that the circuit uses.

Thanks Jimco, 

That will probably save me a few fuses!

Where is this manual? I can't find it, thanks

Fuse size is determined by two factors.  #1 it must be big enough to run the load.   #2 is must be small enough to blow before the wire melts so that is determined by the gauge of the wire used in the circuit.  Your refrigerator draws 9-10 amps @ 12 volts.  So the minimum size should be a 15 amp fuse.   If the wire size is 14 gauge or larger - that will be fine.

14 gauge copper wire needs a 15 amp fuse or smaller to protect it, 12 gauge needs a 20 amp or smaller fuse,  10 gauge needs a 30 amp or smaller, etc.  You do NOT need a fuse twice the amp rating for your refrigerator since it has no motor.  Your refrigerator uses an electric resistance heating element that draws a steady 9-10 amps.  NO surge when it first comes on.   If you had a compressor-driven appliance - it might draw twice its amp rating every time the motor first started.

Hmmm Nothing showed up in your reply. 

My apology. Don't know what happened. I'll try again...........

Attachments:
Thank you so much. Just got a Boler with one of these in it and it needs a little work. This will help a ton. Thanks again! I am assuming RM 36 F versus a RM 36 C really is just a different model of the same series. The pictures look very similar to ours.
The fridge is probably a 3 way and the 3rd option is 12v and you're not using it. The service manual shows 9 amp draw on the 12v side of the element. A 15 amp fuse should be fine. You should only use this option while traveling.
I use to believe that 12v operation was not worth it. They never cooled well on 12v and the drain while operation reduced house battery charge potential. But, fires have occurred while traveling due to cooling core failure and hydrogen gas igniting. It seems road vibration prompts core failure while traveling and that could be a good reason to use the 12v option, especially on older units.

RSS

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2024   Created by Jimco_W001.   Powered by

Badges  |  Report an Issue  |  Terms of Service