I have a 73 Dodge Sportsman with the center-console-type engine cover in the cab (is there a name for that cover?)  On our last trip the cover was getting extremely hot in one spot, hot enough to burn your hand.  When I took the cover off I saw a piece of the yellow fiberglass insulation was torn off in that hot spot.

Since we were already on the road I had to improvise.  I used layers of aluminum foil from the kitchen to cover the spot, and that actually worked to cut down on the heat!

Now I am wondering if anyone has advice for a more permanant (yet thrifty and DIY) fix.  Some thoughts I've had - regular home fiberglass insulation (but what adhesive to use?), fireblock rated expanding foam, or stick with the aluminum foil.  I'm finding a few products online but some are quite expensive and I only need a small spot covered..


Tags: RV Engine Cover Insulation, how to insulate an rv engine cover

Views: 3809

Reply to This

Replies to This Discussion

Hey Tom, that cover is commonly called a dog house.

I work as a sheet metal worker and we commonly line duct work on the inside with duct liner.

It would be ideal thing to use but probably hard for you to obtain.

You can buy spray adhesive at the depot.

House insulation will work fine but if it is faced, the facing can catch fire.

Best and easiest thing for you is to get some spray adhesive and replace the insulation .

Give that a day to dry.

Then spray again and cover with foil or better yet, some very light gauge aluminum if you can find some.

Just remember if the insulation your using is faced, peel the paper facing off because it will catch fire!!!

Hope this helps and if I can help you more, just ask,  John

I had a similar heat and noise issue woth my Dodge Sportsman doghouse and used a foil aoustic and heat barrier. Here is a link to one of the products, the one I use, designed for this purpose: http://greenjeansinsulation.com/2010/06/the-insulator/.

This newer heat and sound deadening material is better than the OEM foil and insulation shield. It has a class A fire rating, intended for use in hot engine compartments.

Important that you use an automotive product to avoid fire. Just go to any chain auto parts store like Autozone and they have rolls of it or even order from them online. It's easy to cut and install.  I'd also take a look and see how i could increase airflow into the engine compartment. that amount of heat is not good and decreases gas mileage to.  post some pics of your install for us to see!

Thanks for the replies!  It will be a little while before I get around to fixing it, but I'll be able to use the advice.

We used rockwool with foil backing stuck on with contact adhesive it makes a nice tidy job but let it dry for a few days because of flamable fumes!! Keeps the noise and heat down.

Our first camper was a 1976 Dodge class c with the same engine cover. (We always called it a dog house because that's what many of the truckers I knew called it.)

But it had what appeared to be a factory made blanket made out of foil faced and backed insulation. Basically two layers of heavy foil sewn together in a cross diamond pattern with about an inch of fiberglass insulation between. It was either from the coach builder or perhaps an after market item but definitely not home made. It was cut perfectly to fit, hemmed and attached with snaps so it could be removed. I would just go on line and look, maybe a custom van site or even J.C.Whitney. After I wrote this I came back five minutes later. I don't know how to link sites, but I did a brief web search and found dozen sites that sell engine insulation, so lot's of possibilities out there.

Same problem with our 77 Sportsman.  The original insulation inside the dog house cover is in nice condition and we didn't have much space to add any on the engine side - plus I am a worry wart and packing in more insul. next to the engine made me a bit nervous about air circulation.  I made a pattern/template from the carpet on the interior side.  Then I sewed an additional cover to put over the carpet.   I used some of the upholstery fabric from decorating the rig and Insul-bright batting.  Insul-bright is used by quilters/sewing folk for the making of pot holders, oven mitts, etc.  I happened to have some on hand and it worked out fine.  This blocks a good bit of the heat and you have no fireproofing issues. You can also use Therm-Flec heat proof fabric which is already quilted and comes in a few neutral colors.  If you know basic sewing or know someone who can sew it is a pretty good solution.  

Jee, I like this solution. And, airflow inside the engine compartment is so important.

Here is a photo.  I still need to add some trim around the bottom but it looks pretty good! You can see that we went "Full 70's" with our decorating scheme.

Nice!  I want to show this to my wife!

You may want to check and see that there is not a missing heat shield off the exhaust manifold- mine was missing one it is a simple chunk of sheet metal that stops the heat from radiating onto the doghouse- saves the throttle foot




  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 


 Paige's VintageTrailer Art  

 Paige's VintageTrailerFabric

 Artist Roads                                            Sandy's Stained Glasshttps://www.pinterest.com/pin/552605816752050167/     



If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW


signing in 1 Reply

Started by Duane Brown in General Discussion Forum. Last reply by Jimco_W001 Jul 23.

Plumbing vents 1 Reply

Started by Sandy St.Louis in RV Repair & Maintence. Last reply by Sandy St.Louis Jul 8.

Blog Posts

Balboa owners

Posted by Bill on May 19, 2020 at 8:11am

camper theft

Posted by Thomas S. Redding on May 18, 2020 at 11:19am


Posted by Eddie Marquez on May 5, 2020 at 2:34pm

"Easy" Loose Pipe Repair

Posted by Don Olson on April 26, 2020 at 12:08am — 1 Comment

Loose Pipe Fix

Posted by Don Olson on April 26, 2020 at 12:02am — 1 Comment



  • Add Videos
  • View All


If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.         JOIN HERE NOW!

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking


A work of art by member Paige Bridges

Get your Good Old RVs T-Shirt HERE


 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2020   Created by Russell E Johnson.   Powered by

Badges  |  Report an Issue  |  Terms of Service