Nice easy jaunt today from Ogden IA to Hannibal O.  Some wind, but nothing to complain about.  Got here after dark and set up just before the rain gods decided to drench the campground with buckets of  water.  

Did have one problem, one of the basement doors came flying apart going down the road.  So I had to stop and empty out the compartment and put everything into the U-Haul trailer we are pulling loaded with my dad's items that I got at his passing.

Anyone build a replacement door for a basement compartment?  It was plastic over fiberboard with a sheet of tin on the interior.  I am thinking of using 3/8 inch marine plywood to build a new panel to go into the door frame.  I would just order a new door, but I think Fleetwood may have discontinued them since it is 28 years old.  LOL

Views: 54

Reply to This

Replies to This Discussion

your on the right track...

I hope you were able to recover most of the door and parts. Should be easy to replicate.

I have the door frame, but all the rest of it is gone, scattered down I80, too many vehicles on that part of the interstate to chance stopping and gathering up pieces

the materials you mentioned and a couple camlocks and your good to go...

Sounds like a job for a handy man Russell, I think you fit that description, any way it sounds like your on the right track. Lowe's sells thin sheets of aluminum you can sheet the outside of the panel with and also aluminum angle to frame it with. good luck with your new project. 

RSS

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 Paige's VintageTrailer Art  

 Paige's VintageTrailerFabric

 Artist Roads                                            Sandy's Stained Glasshttps://www.pinterest.com/pin/552605816752050167/     

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Plumbing vents 1 Reply

Started by Sandy St.Louis in RV Repair & Maintence. Last reply by Sandy St.Louis yesterday.

1977 Itasca cruise control actuator 2 Replies

Started by Mark in Vintage Camper Parts For Sale. Last reply by Jack Wasmuth Jun 13.

Blog Posts

Balboa owners

Posted by Bill on May 19, 2020 at 8:11am

camper theft

Posted by Thomas S. Redding on May 18, 2020 at 11:19am

CAMPING

Posted by Eddie Marquez on May 5, 2020 at 2:34pm

"Easy" Loose Pipe Repair

Posted by Don Olson on April 26, 2020 at 12:08am — 1 Comment

Loose Pipe Fix

Posted by Don Olson on April 26, 2020 at 12:02am — 1 Comment

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.         JOIN HERE NOW!

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

YOUR OWN GORVs T-Shirt!

A work of art by member Paige Bridges

Get your Good Old RVs T-Shirt HERE

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2020   Created by Russell E Johnson.   Powered by

Badges  |  Report an Issue  |  Terms of Service