Rating:
  • Currently 0/5 stars.

Views: 244

Comment

You need to be a member of Good Old RVs to add comments!

Join Good Old RVs

Comment by Craig & Lisa on February 13, 2011 at 7:13pm

I thought that the 2x4's might be for the bunk bed. We have a bunk bed in ours and I was surprised and quite frankly a little scared that they factory only used 2x2's. I plan on changing them to 2x4's as well.

 

I have seen other people do the same thing in the corners that you are doing and I like the structural strength it appears to give. I just wanted to get clarification on why you were doing that. It looks great and keep up the good work. That looks like a lot of fun.

Comment by Kevin Quillan on February 13, 2011 at 1:07pm

Craig,

Most of the framing members are "2x2" but not the ones you see pre-cut (those are always warped and not always the same size from board to board) at Lowes or Home Depot. I ripped 2x4 s down the middle. The corners have more wood as I had to have room to create the curves of the trailer, on a few boards. The 2x4 you see are for bunk support. Most framing is done as it was from the factory with the exception of the curves. They used strips of steam bent oak on the curves. This was one of the areas of demise for this camper. There was not enough strength for the roof "rafters" to hold on to. They seperated from each other over time, which in turn opened up seams and let water in. All members were nailed together from the factory. I improved upon this and fastened everything with pocket hole screw joints.

Hope this helps. If you would like more detailed pictures, I can email some to you.

Kevin

Comment by Craig & Lisa on February 13, 2011 at 2:25am

Ok I know nothing about framing, but it looks like you do and that is a good thing. I am currently tearing down my 16' Terry trailer. Today I pulled out all of the windows and the doors. Within the next week or two I should have all of the sheet metal off of the trailer. Then I am going to start putting new walls back up.

 

Can you give me any pointers? I notice that the corners of your frame have much more wood in them. I can only guess that is to make the structure stronger? I also notice that you have some 2x4's in the wall now as well. Can you explain those as well?

 

Thanks - Craig

Comment by Kevin Quillan on January 24, 2011 at 9:07pm
Driver side wall framed out.

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Starcraft Ceiling Repair

Started by Donald Morgenroth in RV Repair & Maintence Mar 18.

Replacing controller ,? And inverter 1 Reply

Started by Dave King in Vintage & Classic RV Restoration & Purchase. Last reply by Rick Cornell Apr 27, 2023.

Sway Bar Links 2 Replies

Started by Grey Wolf in RV Repair & Maintence. Last reply by Grey Wolf Apr 22, 2023.

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2024   Created by Jimco_W001.   Powered by

Badges  |  Report an Issue  |  Terms of Service