This all started back in July 2012.

 

My folks started talking about sending their old motorhome off to the crusher seeing as it hadn't been used in years.

 

 

They bought this used rig just before my dad retired and they enjoyed it for 20+ years touring around Ireland and Western Europe. Unfortunately, the damp Irish weather wasn't kind to it and the rust demons finally caught up and did their thing. It seemed like every year, my dad was repairing rust on the cab. But in 2006, he noticed the firewall had rusted through quite badly and he became concerned with the safety of the rig, so it was moved to the bottom of the garden and was parked for good. From then on, it's primary function was for storage and it filled up pretty quick with all sortsa stuff.. So when they started talking about clearing it out and getting rid of it, I got a lump in my throat. I mean this camper has been in the family forever. We had such a great time in it, I can't even begin to think about it being broken up and scrapped. No sir.

 

When I expressed an interest in taking it away and fixing it up, my folks were delighted and told us that we could have it if that's what we wanted to do. They've moved onto other things now that they are in their later years and they've lost interest in the camping lifestyle. We, on the other hand, are very active campers. We get away as often as we can in our Outwell hartford family tent. So upgrading to an RV will be fantastic, especially considering the family history of our old coachmen. Consider it a new chapter in the life of the old girl! The only downside is that there is a LOT of sweat equity due on this camper before we put a tyre on the road!

 

My plan... Simply to repair the cab 100%, refurb the accommodation unit, and enjoy the camper with my own family and maybe feed some of my own nostalgia along the way... No other camper will do. I'm sure some of you know that story....

 

It wasn't in great shape. Here is what we saw when we pulled the tattered covers down off it.

 

It didn't look too bad on first inspection, but after pulling back some carpet & panels, and some probing with a pointy screwdriver, we uncovered LOTS of problems... Firewall, floors, doors, etc. all rotten.

 

The firewall and wiper well being the biggest problem -

 

Both doors were shot too.

 

Knowing this, we continued.

 

We started off by getting the engine running which took several weekends of cursing & swearing, but it eventually fired up - It hadn't run in several years prior to this so I was really happy it came to life and fired on all 8. :)
We had to move the camper to my workshop where the real teardown could begin. Even though it was now running and driving (just about) I had some concerns about the drivetrain and brakes, and figured it wasn't safe enough to drive the 40 miles to my home, so we decided to get a breakdown hauler to transport it for us on a flatbed.

 

On the 28th Oct 2012 I started stripping down the front end. The lions share of this overhaul is the sheet metal on the cab which has been eaten away by years of exposure in a salty, coastal environment.

Yes there is supposed to be a bulkhead under the windscreen. Mostly rust & cobwebs here... (yikes)

 

 

Cardboard bulkhead in progress ... :-)

 

 

Initially I had hoped to make repairs. Making cardboard templates, then transferring the patterns to steel. I intended to fabricate a bulkhead and other components which had rotted away. After a lot of weekends, beating, cutting and shaping sheet metal, I realised this was going to take YEARS to complete at the rate I was going. Also, I became uncomfortable with the thought of having a Frankenstein cab. Not good. My morale and ambition began to wain. I stopped all fabrication work on the cab around February 2013 and started working on plan B.

 


Plan B:
So long story short, I searched for a donor van that I could scrap and harvest the parts I needed. On July 2013 I bought the remains of a 1988 GMC G2500 van from a local van enthusiast. I stripped it down and took the parts I needed..

 

 

Chop Chop Chop!

 

 

 

 

I then rolled it into the shed to make modifications to the donor cab so that it would fit onto our motorhome. I  spent the next couple of months just working on the cab section alone. The donor cab is a 1988 G2500 which is NOT the same as our 1980 G35 so some extensive modification was required to make it work.

 

 

I had to do some work on rusty patches around the windshield frame. I was going to just de-rustify them and fill over with bondo, but I decided to do it right and cut out the rot and weld in new clean metal. Easier to do it now, than later when I have the cab fitted to the camper.

 

 

I pulled the engine and transmission out of the camper on the last week of October 2013 - 6.7 litre (400ci) V8,  TH400 trans.

 

And started cutting away at what was left of the cab.

 

 

It's been slow progress... I've had some pretty serious corrosion issues on my front cross member so I had to deal with that. Unfortunately this involved stripping the front suspension right down to it's component parts (which was no harm, but wasn't on the master plan). I was able to use the cross member from my donor van, so it was a matter of doing a parts-swop from one to another. The original member was too badly rusted through to consider re-using. That diversion added a few weeks to the project. I also discovered some pretty serious pitting on the kerb-side lower control arm, so for safety sake, I decided to buy a new one from rockauto.

 

So for the past few weeks I've only been able to refurb the front suspension components and finish painting the chassis. I got the components sandblasted locally. I also did some work on the top capping on the chassis rails. They were a bit thin in places so I replaced them while I was able to get at them.
I finished all that off with 3 coats of rustbullet 'automotive' (silver) and 2 coats of rustbullet 'blackshell'. So with any luck, I won't have any more rust issues under there! I still might give it all a coat of some sort of rubberised bed-liner or some sort of heavy stone chip, just to protect it...   still need to make my mind up on that.

Last weekend I got around to fitting the donor cab to the front of the camper so that's a pretty significant milestone for me... :cool:

A few photos -

 

Bad corrosion on the back of the cross member.

Out with the old (bottom), in with the new'ish [ (top) -
I got all of the parts sandblasted then painted them with Rustbullet paint.

I had repainted this control arm, but decided not to use it in the end. The pitting was a bit too bad for my liking.

I made up a make-shift engine stand for the V8 from a few bits of scrap 40mm & 20mm box. It'll make the engine clean up a little easier.

Replaced the top capping on both chassis rails -

 

Fitted the cab :-)

Once I have the cab refurb complete we'll be switching focus to the habitation unit -

Its in relatively good order considering it's age. It's just a little tired. Everything works and we've scrubbed the heck out of it, so its good enough to sleep & live-in right now. It just needs to be brought into the 21st century.  There are no significant signs of leaks or rot in the ceilings, walls or floors apart from one small area in the ceiling in the overcab which needs to be sorted. We'll be giving it a sympathetic modernisation, nothing too mad. Replacing fabrics & floor coverings and upgrading the electrics. The shag pile carpets have seen their day so laminate wood flooring is probably on the list.

I had a play with the coleman furnace which promptly fired up after finding an electrical fault in the wall thermostat. :-)

 

So.... that's where we are right now in February 2014.

 

I'm doing all of this work in my spare time.

Unfortunately, I only have time on the weekends as what I do for a living involves long days at the office followed by long commute to & from work. So wrenching on the camper is my weekend therapy.

 

You'll notice that progress is generally pretty slow.

 

I have a rebuild thread going over on Motorhomecraic if you want to read the full story... http://www.motorhomecraic.com/forum/topic.php?t=2063&page=1

 

More updates to follow.

 

 

 

Views: 6185

Comment

You need to be a member of Good Old RVs to add comments!

Join Good Old RVs

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Starcraft Ceiling Repair

Started by Donald Morgenroth in RV Repair & Maintence Mar 18.

Replacing controller ,? And inverter 1 Reply

Started by Dave King in Vintage & Classic RV Restoration & Purchase. Last reply by Rick Cornell Apr 27, 2023.

Sway Bar Links 2 Replies

Started by Grey Wolf in RV Repair & Maintence. Last reply by Grey Wolf Apr 22, 2023.

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2024   Created by Jimco_W001.   Powered by

Badges  |  Report an Issue  |  Terms of Service