Information

REVCON OWNERS

Location: DFW AREA
Members: 7
Latest Activity: Jul 5, 2017

Discussion Forum

What to put in the dash plaque? 1 Reply

Hello everyone, l don't know if all Revcons have these plaques on the dash but my '85 does. it says, "Totally Enginneered by Revcon for", and then you put your name on an insert. I am the third…Continue

Started by Incurablescrounge. Last reply by FrannyLee May 5, 2017.

Comment Wall

Comment

You need to be a member of REVCON OWNERS to add comments!

Comment by FrannyLee on July 5, 2017 at 3:05pm

I have decided to sell my '75 flat nose Revcon. Is there much of a market out there for this great classic RV? Where besides Craigslist would be a good place to list this? I would appreciate any advice.

I am too old, on my own and lack the skills, tools and agility to take this on by myself. I cannot afford shop prices; I had a local guy who was good but he flaked out on me and I have made no headway for a couple of months now.

It runs fine, drove it from Sacramento to southern Oregon and then to the Oregon Coast and back. It is in good condition but still needs cosmetic work. I has new rear brakes. A slow radiator leak was fixed, the fan had lost a blade and was replaced. There is a solar charger for the startup battery.

A few of the lower cupboards need attention. I have ripped out the nasty ancient carpet but have not replaced the flooring yet and still need to replace the window channel material. I did find where to get that and have 2 samples of channel material to be decided upon.

I found a replacement fridge which I will be picking up this weekend. It is a Dometic RM2620.

I updated the cook stove, had a new converter installed and added/replaced some of the lighting fixtures to LED. I also replaced the noisy old furnace.

The tires were brand new when I got it last November.

Comment by FrannyLee on May 7, 2017 at 2:56pm

Good to know. I truly appreciate that. :)

Comment by Incurablescrounge on May 7, 2017 at 12:09pm
I did not take the glass out. I was able to pull out the old and slide in the new. A lot of pulling and tugging, sliding the glass back and forth with the channel to work it in. I used some plastic trim pry tools from Harbor Freight and an old T-handle dent pulling tool. I also used some female personal lubricant to help. It really helped and is water soluble so it washes away. I started at the top and worked it all around. Be careful at the edges of the tempered glass, a chip can lead to a shatter. It was a big job but our windows didn't move either. The old channel had metal coiled inside the felt and rubber and was all rusted.
Comment by FrannyLee on May 7, 2017 at 9:37am

Thanks. I did clean them. I got that site up though and they have the right stuff, called pile, not felt. So you had to take the windows out? I can't see any way but to take out the entire frame. Any tips you want to share on how you did this would be greatly appreciated.  If I don't get someone to help it will be on me and hit-or-miss guessing could end badly. I have absolutely no experience in these sort of things and no documentation or manuals to advise me with this critter.

Comment by Incurablescrounge on May 6, 2017 at 8:27am
Is the rubber channel in good shape? Ours were crumbling and rusty. It was a pain to do but, we replaced all the channels for the windows. Vintage Trailer Supply has them. Maybe there is a lot of dirt and debris in the channels. As for the silicone dilemma, I don't know.
Comment by FrannyLee on May 5, 2017 at 3:43pm

I got this in November and had no reason to open the windows. They were a bit sticky but I figured I could clean and loosen them up when the time was right. But now I've run into a problem. I scraped the felt-like material where the window slides and a friend suggested a silicone spray. the result is 1 window opens half way, a couple about an inch and I am smelling this silicone still 4 days later. I live in it so that odor really sucks. Anyone have a better suggestion for loosening up the windows? Mine are simple glass with no frame that sits in the slots.

Comment by FrannyLee on March 13, 2017 at 9:44pm

SO .. I just had the rear brakes done at a shop, they said I had a radiator leak.. My own mechanic found it, pulled the radiator and fixed that. Installed a new 3 burner stove and a replacement furnace that is so quiet and runs nice. My fridge, which ran ok at first but the freezer stopped freezing and the fridge part is getting warmer could be fixed by pulling it out and turning it upside down for a day. Anyone ever hear of that?

We have plumbing to fix and still some wiring issues. I need house batteries and I am hoping to find the right piece of wood for a new counter. The old laminate formica is ugly as sin and ready to retire. I also want to put in a tall faucet. AND .. I need to figure out a good water filter system. There are so many out there. Anyone have any suggestions? I want the kind that will do it all bacteria etc. Never know what your gonna have available for a fill up. 

Anyhow, I am finally getting stuff done. Took a while to find the right help. YAY!

Comment by FrannyLee on December 21, 2016 at 10:41pm

Comment by Pablo M. Rodriguez on June 6, 2016 at 12:56pm

Working on finding one. 

Comment by Craig Martin on April 15, 2016 at 9:11am

Im looking for some pics of the exhaust on a flat nose.

When i got my 72 there was no exhaust at all. Need to know the proper routing from the manifolds down.

Any help on this would be appreciated.

Thanks,

 

Members (7)

 
 
 

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Discussion Forum

What to put in the dash plaque? 1 Reply

Started by Incurablescrounge. Last reply by FrannyLee May 5, 2017.

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2024   Created by Jimco_W001.   Powered by

Badges  |  Report an Issue  |  Terms of Service