Hi, so I am really new at this, so if I do something the wrong way please let me know. My husband and I were just given what I think is a 1950 Spartenette and the inside is in fantastic shape with most everything original. However, it looks like someone ran into the tongue and broke it and it's all rusted. I am trying to get advice on how best to replace the tongue. I found a place in Panama City that can do repair to the front exterior but I have to get it to them. The reason it was given to us is that they want it gone, so I don't have a lot of time to figure it out. I would appreciate any advice. I will check back tomorrow and see if there is anyone out there that might be able to help me with this. Thanks!
Tags:
Could you post some pictures?
If the tongue is completely rusted out, you would need to fabricate a new one from steel box tubing and steel plate.
If it isn't too bad, I could be welded and reinforced.
Assuming there's a good frame to attach a new tongue to, or the tongue just needs to be welded back together, a mobile welding company could do it.
craigslist.org has an RV section. Often you find ads for RV transport. I used a "suck up bed" wreck once, that depends on the weight capacity of the wrecker.
I googled spartanette and saw pictures of that era. It appears there is a front cross-member. I am guessing, but the pictures suggest a 7 foot width. The frame rails left and right run the length. So if that front cross member is straight and not bent then the "tongue" looked like it was 6" x 1/4"(C) channel steel. Good Luck, there are still a few of 'em out there so thats a plus.
A tow company with a roll back flat bed may be in order or look for a welder to inspect it and or, make the repair/ replacement to get it off the other peoples property. A lot of times you can find complete tongs at scrap yards or possibly an RV dealer may have some parts or a good lead on who in the area can help you out. Good luck with your project.
As you can see the tongue is a compete goner. But the bottom frame is still straight, but the three pieces of frame under the front window are bent.
I would worry about it pulling straight even after repair.
I stole this image from Google to show how the A frame let's back into the cross members.
I personally would fabricate a new A frame and weld it in...but I have welders and a warehouse to mess around in....and a couple months of down time each winter.
To get it home, you'd best find a company with a roll back wrecker.
The materials would cost you $150 maybe, but the cutting, cleaning, fabrication and welding would be expensive if you couldn't do it yourself.
Pretty amazing how concrete disintegrates steel over time
Edit: That should have read "lets" as in notches or pockets. I didn't catch the aotocorrect
Mike, You dont steal on the internet you "LEECH"!
I've seen crushed beer cans in better shape. A good reminder make sure your ball hitch is closed and safety chains attached, cuz the driver looked in the rear view mirror to see it passing him.
if the trailer doesn't have brakes installed you might get that brake system where rearward pressure on the hitch forces fluid into the brakes.
https://www.northerntool.com/shop/tools/product_200596722_200596722
i haven't used this but i like the idea.
there are 2 basic designs on the a frame/frame connection. the “deck over” that Mike has illustrated and a “through deck” design with the a frame integral in the frame. I would modify to a deck over design as I believe that to be easier and stronger in the long run. Maybe do an “axle swap” if necessary to raise the body unless you wanted to keep it period correct and not modify height.
If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW
Started by Kate in RV Repair & Maintence Oct 5.
Started by Dixie RV Doctor in RV Repair & Maintence Sep 19.
Started by KD Walters in RV Repair & Maintence Aug 20.
Posted by Bonnie Weir on July 13, 2024 at 2:55pm — 2 Comments
Posted by Alfonso Vilches on July 7, 2023 at 8:18pm
Posted by Ellen (Ellie) Rice on December 9, 2022 at 6:24pm — 1 Comment
Posted by David & Misty Preciado on June 10, 2022 at 6:18pm — 2 Comments
Added by Jimco_W001
-CLASS C FULL Frame off Restoration by Kevin Crowley
-Kerry Malseed's 1947 Flxible Clipper Bus Restoration
-Kevin's Wildcat Trailer Frame Up Restoration & Materials Used
-Rod Paints His Trailer Before/After Pics
-Understanding Brake Controllers
Blogs, Posts and Other things We like to Follow....
Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking
A work of art by member Paige Bridges
+++++++++++++++++++++++++++++
Disclaimer - Please Read it
Enjoy this site and use it totally at your own risk.
By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use banks for purchases. Have fun!
Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©
© 2024 Created by Jimco_W001. Powered by