My wife and I just acquired this beauty and have decided to get her back on the road. We may have saved it from the scrap yard. What the heck, it was free not counting the near $200 to get her home.

We are on a tight budget and will be doing the vast majority of the work with reclaimed, used/scrounged and refurbed materials and parts.

Looking forward to the project and excited to find this valuble resourse to assist and document the endeavor.

Thanks in advance for your assistance.

Views: 1682

Reply to This

Replies to This Discussion

Just starting the planning stage.

Know of any technical resources for manuals? Electrical, accessories, plumbing, heat and AC.

No engine or tranny but most everything else is there.

Thinking about a 351 Windsor and C6 transmission

I suggest the 351 Cleveland, same size but lots more power.  I have owned both and to me the Windsor is a gutless wonder compared to the Cleveland.  Both were in 1/2 ton ford pickups.

I'll do some research but it makes sense. The Cleavland is a big block I believe.

I'm a small engine guy.

Hey there...new to the site and would like to give you more info on your engine choice.

With todays technology, the Windsor would be a better bet, lighter/ narrower than a Cleveland. Easier to get parts for (built into the 90's last Cleveland was 73) Clevelands were considered small blocks (335 series)had the same bellhousing bolt pattern as 289 to 351W, however the were never installed in pickups, it was the 351/400M that made it to trucks, Same heads as the Cleveland but had a modified block deck height (M). They were gas guzzlers and not as strong as the Cleveland internally. These engines were in the big block 385 series along with the 429/460. Hope this helps your research. Geo.

PS looks like a cool project

Pat Daly, you are my favorite.  We think she is a handsome beast, too.  Someone suggested that we could get something mostly done for $7-10 grand.  They just don't get it.  The fun is in the restoration.  I will likely eat my words in the next year.  It's strange lying in bed the night before you pick it up, with just as much buyers remorse as if it wasn't free.

What was it originally? I see a Bronco in your pic, so I can understand a blue-oval bias :). I would go with whatever the manufacturer put in it. Would save a lot of headaches with regard to finding replacement parts, fitment, etc. I accidentally wound up with a Chevy with my tow-yard find. It was a happy coincidence given my affinity for GM products. I put a 454 in it and it does really well.

I believe it was a 292 originally.  My understanding is that it was way underpowered.  Jay and I (I'm the wife) are hoping to find the "sweet spot" between economy and power.  Suggestions are definitely appreciated.  We have a 460 in our F250, pictured below.  It is a thirsty bugger.

A bit overhelmed with the tough of the project. Oh well, one step at a time.

Next- Clean the interior......it's full of stuff.

Pushing it on the trailer. Towed with my F250 and it didn't like it very well.

So it begins.....

The good news, shes been stored under cover and mostly dry.

I think that's a neat vintage vehicle.  You can get stroker kits for the 351 Windsor and make it a 427 cubic inch engine, if you would like.  Same fit, but with big block torque!!

What a cool looking MH. I have never seen one that looked like this one. I sort of wonder why you are looking at Ford power plants ? I am a big Ford fan but, in my limited experience, the Ford motors tend to be nearly twice the money of a Chevy or Mopar and parts are more expensive too. Remember, I love Fords too. I had a 460 in my previous motorhome with a full Banks kit. Oh yeah, tons of power. Horrible gas mileage. I now have a 454 in my Vintage AS MH. I think you said ti had a 292 and as I recall that is a Ford motor but, I thought Ford stopped building the 292 long before your MH would have been built. If going Ford, could you go E4OD C6 trans so that you can take advantage of overdrive to get much better gas mileage as well as increase the life of your motor via lower RPM s/ less turns. That big flat box is going to need all the help it can get with performance and fuel econ. 

I like it. on the top scale of cool. Good luck with it. 

If I may, Jeff  I think the 292 (Y) block was made until '64-5? Installed in light Ford trucks. Nowadays with all the aftermarket parts that are available,  all engines are comparable in cost. Also if you know what vintage engine parts to use you can build a ford very inexpensively. It is a common misconception that it costs twice as much for ford or Chrysler engines than it does for chevys

 The AOD from the midish '80's beefed up a little, .should work fine behind a Windsor in the MH.

Geo. 

RSS

Members

HOW TO MEMBER POSTS

  •         How To Links 

-Search Good Old RV's

-Start a New Group 

-Roof Repair Photos & Products

-Repair an RV Roof

-Pick Roof Sealer   

-Understanding RV Electrical Systems 

-Get RV Insurance   

-What to Look For When Buying a Used RV

-Jack Installs Fuel Injection in his Dodge 

 RV ARTISTS 

 

 Artist Roads                                              

                      

JOIN US AT GOOD OLD RVS

If you love classic and vintage RVs then come Join us. Come on in and have some fun. JOIN HERE NOW

Forum

Starcraft Ceiling Repair

Started by Donald Morgenroth in RV Repair & Maintence Mar 18.

Replacing controller ,? And inverter 1 Reply

Started by Dave King in Vintage & Classic RV Restoration & Purchase. Last reply by Rick Cornell Apr 27, 2023.

Sway Bar Links 2 Replies

Started by Grey Wolf in RV Repair & Maintence. Last reply by Grey Wolf Apr 22, 2023.

Events

Videos

  • Add Videos
  • View All

JOIN US - COME ON IN!

If you love classic and vintage RVs then come Join us.

 Come on in and have some fun.      

 Dedicated to a simpler, more rewarding and fun way of life in a Good Old RV... 

Vintage Travel Trailers, Vintage Campers, Camper Restoration, Bus Conversions, Vintage RV Forums, Old RVs, Tiny Homes, Boondocking

A work of art by member Paige Bridges

+++++++++++++++++++++++++++++

 Disclaimer - Please Read it

Enjoy this site and use it totally at your own risk.

By using or viewing this site YOU agree to Hold Harmless anyone associated with it including other members. Also, YOU agree that YOU are solely responsible for ANY and ALL actions, results or damages. Members "opinions" are just that and any repair or alteration comments or recommendations are by folks who are not licensed repair  or mechanical professionals. Any repairs or modifications you do totally at YOUR OWN RISK. Use licensed professionals for all work to avoid possible serious injury or damage. Use  banks for purchases.  Have fun!

Copywrite & Trade Mark Registered GoodOldRV© ,GoodOldRVs©, GoodOldRVs.com©,GoodOldRVs.net©,GoodOldRV.Com©

© 2024   Created by Jimco_W001.   Powered by

Badges  |  Report an Issue  |  Terms of Service